That Cat Came Back... 19 years later!  Photo: Joe Michaud

Dom_L.JPG (43932 bytes)
This picture shows the Backing Plate side of the Manx rear wheel and progressively wound fork springs. There are alloy damper bodies (Manx) and damper rods in the forks, as well as alloy replacements for more or less anything anything we could have thought of.  The left rear engine plate, however. is solid from the top rear to bottom rear engine mounting points on the frame, and has a minimal sized hole in it for the left end of the gearbox to pass through.  The plates are 2024 and thicker than is usual practice.

Rims are Borrani, tires are ancient but unworn KR-83 Dunlop (last generation treaded Road Race tires).  The seat is an awful Manx replica.   RIGHT SIDE PHOTO IS BETTER, hang in there

Link to Full sized image, complete right profile  45K jpg
Link to Full sized image, Kehin CR carburetor detail  58K jpg

Back to Phantom Oiler Table of Contents
Comments or suggestions?   Drop us a note!  Flames are OK if you can spel!
Email to: Phantom Oiler
©2002 TC Enterprises